Denon avr2307ci manual

Previous Page. Next Page. Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.

Page 7: Part Names And Functions Getting Started Part names and functions For details on the functions of these parts, refer to the pages given in parentheses. Page Speaker Connections Turn clockwise to tighten, then insert the banana plug. Set the volume to halfway and set the crossover frequency to the maximum or Low pass filter off if your subwoofer can adjust the output volume and the crossover frequency.

Some subwoofers have a standby mode. Measurement of each channel is performed as follows: 1: The subwoofer speaker is measured twice. Please check the following matters, reset the pertinent items, and measure again.

Page Connecting Other Sources Connecting Other Sources Cable indications The hookup diagrams on the subsequent pages assume the use of the following optional connection cables not supplied. IN terminals for playback. The diagram below shows an example of connections for when the iPod is assigned to the VCR-2 terminal. Connecting the RSC terminal This terminal is used for an external controller. Perform the following operation before using an external controller connected to the RSC terminal We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source.

Select the mode to suit your tastes. The audio signals do not pass through the tone circuits, etc. Please confirm that this adapter will work with the stereo you intend to use. It seems that the chamber reserved for her in their lodgings in Eastgate has been damaged by fire, and there is at present no other suitable accommodation available.

He adds that Mrs Johnson would be most gratified to extend her acquaintance with Mrs Frant and Miss Carswall, so the arrangement would kill two birds with one stone. The local government demanded that the damaged selfrep be impounded and its operators arrested, prosecuted, and deported or imprisoned. One spoke ominously of a sentence designed to shut her up for good. Boldt had much of what he wanted. He tried the passenger door, but found it locked. It was all they were capable of. Audio manuals and audio service pdf instructions.

Find the user manual you need for your audio device and more at ManualsOnline. At least the twins will be saved. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.

Page 7: Part Names And Functions Getting Started Part names and functions For details on the functions of these parts, refer to the pages given in parentheses. Page Speaker Connections Turn clockwise to tighten, then insert the banana plug. Set the volume to halfway and set the crossover frequency to the maximum or Low pass filter off if your subwoofer can adjust the output volume and the crossover frequency. This remarkable component has been engineered to provide superb surround.

Fundamentals of physics by halliday resnick and walker 7th edition pdf interaction of x rays with matter pdf. Return the lever. Mount b. With the antenna attached to a wall. Installation hole Mount on wall, etc. Variable A Center speaker Connection terminal for subwoofer with built-in amplifier. Turn the DC 12 V voltage on and off for the individual functions and surround modes. A Perform the following operation before using an external controller connected to the RSC terminal: 1.

Perform the operation to turn off the power from the external control. Check that the product has been set to the standby mode.

After checking the above, check the connections of the external controller. Operation is possible. Incomplete connections will result in the generation of noise. Never use it for hair driers, monitors or other electrical appliances.

Never connect equipment whose total power consumption exceeds W 1 A. The input switches to the analog input terminals is no digital signals are being input. Noise may be generated when a mode different from the input signal is set. IN External decoder input terminal selection mode : The signals input to the various input terminals are played. Depending on the channel level settings and the different surround mode settings and when in the down-mix mode, it may not be possible to adjust the volume to 18 dB.

To lower the subwoofer channel level in the EXT. For some players the playback level of the SW channel may seen strong. IN mode together with a picture, select the input source to which the video signal is connected first, then set the input mode.

IN , the surround mode cannot be set. You can adjust the muting level Using the surround modes Types of surround modes and their features page We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source. Switching the front speakers is a 6. The brightness of the display can be adjusted in three steps. The display can also be turned off. Select the one most suited for the source being used.

Select the mode to suit your tastes. The audio signals do not pass through the tone circuits, etc. The audio signals are transmitted directly, without passing through the tone circuits, etc.

LFE: To play the various types of software properly, we recommend setting to the values shown below. Can be set in surround modes other than direct mode.

Can be set separately for the different surround modes. This is a function for automatically correcting the standard signal level for different program sources. Norm Offset - 4dB The numbers are the correction value when corrected to the standard level. This mode is optimal for playing program sources recorded in Dolby Surround. Because of this, the MUSIC mode offers a number of optional parameters for further adjusting the sound field. GAME: This mode is optimum for games. The GAME mode can only be used for 2-channel audio sources.

This compensates for when the sound field image seems unbalanced. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.

Room EQ: Displays the type of equalizer currently set. One of seven surround modes can be selected according to the program source and parameters can be further adjusted to achieve even more realistic sound fields.

The front L R channel signals are played from the surround and surround back L R channels and only the in-phase component of the L and R channels is played on the center channel. NOTE 2: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel left or right , so input signals to both channels.

If you have a source component with only one audio output monophonic camcorder, etc. In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes. Does not express size of room in which played.

The settable speaker switches each time this button is pressed. The SW channel level can be turned off by decreasing it one step from — F] to attenuate the volume of all the front side Press [F 3 speakers, G] to attenuate the volume of all the rear [G side speakers. The fader function does not affect the subwoofer. It is possible to adjust so that the volume of the speaker whose volume is the lowest is — The frequency changes continuously when the button is held in.

XM Satellite Radio. Select from over channels of music, news, sports, comedy, talk, and entertainment. Coast-to-coast coverage. Digital quality sound. Listeners can subscribe by visiting XM on the Web at www. Customers should have their Radio ID and credit card ready. The Radio ID can be found by selecting channel 0 on the radio. A total of 56 broadcast stations can be preset — 8 stations channels 1 to 8 in each of blocks A to G. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into human-readable form.

The software is licensed solely for use within this product. Other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Subscriptions subject to Customer Agreement available at xmradio. XM service only available in the 48 contiguous United States.

When the artist name and song title are received, they are displayed. XM is displayed. The dialogues are easier to hear at night and when listening with the volume low.

The iPod can be controlled using the buttons on the main unit and the remote control unit. With the iPod, non-copyrighted contents and contents that may be legally reproduced or played may be reproduced and played by individuals for their personal use.

Violating copyrights is prohibited by law. Personal memory plus function User mode function The AVRCI is equipped with a function for storing the selected input source, the auto surround mode and input mode in the memory and selecting these settings when you want to use them.

The surround mode last selected and the input mode setting are stored individually for the different input sources. The surround parameters, tone control settings and playback level balance for the different output channels are memorized for each surround mode. Check the connections and settings. Press again to resume. The mode switches as follows each time [MODE] is pressed. Use the latest version of the software. Information on the latest version of the software can be obtained on the Apple Computer website.

The AVRCI can display up to 64 characters, consisting of numbers, capital letters and small letters. The iPod can be disconnected after switching to a function other than the one to which the iPod input is assigned. Refer to ZONE2 on the diagram below. For operating instructions, refer to the manuals of the respective components. Remote control unit operations during multisource playback This is only possible when the main unit in the ZONE2 mode The ZONE2 source switches directly.

For operations, see the operating instructions of the device from which you are recording audio or video signals. When the power is turned back on, the settings made when the power was switched to standby are recalled. Initialization of the microprocessor Reset Use the procedure described below to reset the microprocessor if the display is abnormal or if the buttons on the main unit or the remote control unit do not operate.

OFF 64 2. Speaker Setup Items 1 2 Speaker Configuration Automatically set the output component and properties for the various channels according to the combination of speakers to be actually used for surround playback. Subwoofer Setup Select the method of playback of the subwoofer for playing the low bass signals.

Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level. Set the frequency Hz below which the bass sound of the various speakers is to be output from the subwoofer. Center Sp. Subwoofer Surround Sp. Surround Back Sp. IN 2 Subwoofer Level Default settings This assigns the digital input terminals for the different input sources.

Function Rename The name of the input function that is displayed can be changed. Up to 56 FM stations can be preset automatically. Auto Preset Memory 6 Tuner Presets 4. IN subwoofer terminal.

Preset Name — 52 6 Default settings Component In Assignment This assigns the component video input terminals for the different input sources. Select the HDMI audio signal playback method. When this function is used, the format of the signal output from the HDMI terminal can be set. OFF 54 Adjust the time delay between the video and audio signals. Back 58 Vol. On Lev. This sets whether or not to lock the system setup settings so that they cannot be changed.

We recommend that you use the on screen display when you make system adjustments. Some representative front display and on screen display examples are shown below.

D H to select the input source, then press F G 3 Press to set. To select a menu, press D or H. Digital In Sub-menu title 2 3 Press F to execute. The playback level is corrected individually for the different input sources. OFF: This is the factory default setting. AUX: When using a Control Dock for iPod, it is possible to connect with the audio and video input terminals of the assigned function. Press F G to move the cursor 2 to the desired 3 position, then press D H to select the character.

Up to 8 characters can be input. The characters that can be input are shown below. The preset channels can be given the names you want. Except the XM channels.